Lightwave Communications SCS3230 User Manual Page 70
- Page / 97
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
ConsoleServer 3200 System Lightwave Communications
Rev. A - 70 - www.lightwavecom.com
• The unique hardware (MAC) address of the card, expressed as six groups of one-byte
hexadecimal numbers
• IP source 3200, BootP, RARP
• The primary IP information, including: IP address, subnet mask, and gateway
• The secondary IP information, including: destination address, subnet mask, and gateway
The terminal and device cards will return the following information:
• The terminal or device port number
• The port letter as indicated on card label
• Equipment port type (DCE or DTE)
• Baud rate
• Parity; N=none, E=even, O=odd
• Data bits
• Stop bits
• Flow control type
• Status of RTS line; 0=off, 1=on
• Status of DTR line; 0=off, 1=on
The labels “RTS” and “DTR” do not change when the port type is changed from DCE to DTE.
When the port type is changed, the label “RTS” indicates the status of the CTS line, and “DTR”
indicates the status of the DSR line.
7.9.5 POWERSTATUS Command
sys admin>>powerstatus
Power supply A is OK
Power supply B is OK
sys admin>>
The POWERSTATUS command displays the status of the two redundant power supplies in the
SCS3230 chassis. Power supplies will either be listed as OK or Failed. The SCS3230 will
continue to function with one failed power supply. Contact Lightwave for information regarding
replacement if a power supply fails.
7.9.6 LOG Command
sys admin>>log /enable
The SCS3230 can report current system activity through control card port B. The report is
enable using the command LOG /ENABLE, and disabled using the command LOG /DISABLE.
The system will report user logins, logouts, device port selections, and entry/exit from direct
mode. Note that there is no system clock on the SCS3230, so there is no time/date stamp on
system activity. If a time/date stamp is required, it must be provided by the system capturing
the data output.
- SCS3230 1
- Copyright & Trademark 2
- Disclaimer & Revisions 3
- Declaration of Conformity 4
- 15.00.038 v May 2002 5
- 15.00.038 vii May 2002 7
- For Your Notes 8
- 1: Product Description 9
- 1.2 Upgrade Description 10
- 1.3 System Features 10
- 1.4 Hardware Features 11
- 15.00.038 - 13 - May 2002 13
- 1.5.1 10/100 Port (Network) 14
- 1.5.2 TERM Port (Console) 15
- 2: System Overview 16
- 2.5 Interface 17
- 2.4 Security Passwords 17
- 3: System Components 18
- 3.2 Device Cards 19
- 3.3 Access Cards 19
- 3.3.3 TERMINAL Cards 20
- 3.3.4 3200 Network Cards 20
- 3.3.6 Modem Card 21
- 4.1 Items in a SCS3230 Kit 22
- 4.2.2 Restore Procedure 23
- To Update a Card or Cards 25
- 5.1 Terminal Card 27
- 5.2 NETWORK / CONTROL Card 28
- 5.3 Modem Card 28
- 5.4 Device Card 29
- ConsoleServer 3200 31
- %&'( 32
- System Administration 33
- 6.1 Power-up Sequence and 34
- 15.00.038 - 35 - May 2002 35
- 6.1.3 Logging Out 36
- 15.00.038 - 37 - May 2002 37
- 6.1.5 Abbreviations 38
- 15.00.038 - 39 - May 2002 39
- 6.3 Setup Script 40
- 15.00.038 - 41 - May 2002 41
- 15.00.038 - 43 - May 2002 43
- 6.3.2 Timezone (Clock) 44
- 15.00.038 - 45 - May 2002 45
- 6.3.3 Configure DNS 46
- 15.00.038 - 47 - May 2002 47
- 6.3.4 Hosts 48
- 6.3.5 Services 49
- 6.3.6 Syslog 50
- 6.3.7 SSH Logins 51
- 6.3.8 TELNET logins 52
- 6.3.9 NTP Daemon 52
- 15.00.038 - 53 - May 2002 53
- 6.3.12 Ping Attempts 55
- 6.3.13 Confirm Changes 57
- 6.3.14 SAVE Command 58
- 7.1 Adding a User ID 59
- 7.2 Editing a User ID 61
- 7.3 Listing User IDs 61
- 7.4 Deleting a User ID 63
- 7.5 Devices Command 63
- 7.6 Terminals Command 65
- 7.7 Network Commands 65
- 7.8 Modem Command 66
- 7.9 Status Commands 67
- 7.9.2 LISTCARDS Command 68
- 7.9.3 VERSION Command 68
- 7.9.4 INFO Command 69
- 7.9.5 POWERSTATUS Command 70
- 7.9.6 LOG Command 70
- 15.00.038 - 71 - May 2002 71
- 7.10.1 LINESPERPAGE Command 72
- 7.10.2 TIMEOUT Command 72
- 7.11.1 BREAK Command 73
- 7.11.2 FORCELOGOUT Command 73
- 7.11.4 MODEMTIMEOUT Command 74
- 8.1 Terminal Card 75
- 8.2 Network Card 75
- 8.3 Modem Card 76
- 8.4 Overview of Commands 77
- 8.6 Logging Out 80
- 8.7 Checking Connections 80
- 8.8 Selecting a Device Port 81
- 15.00.038 - 83 - May 2002 83
- 8.10 Direct Mode 84
- 8.11 Using the Buffer 85
- 15.00.038 - 87 - May 2002 87
- 15.00.038 - 91 - May 2002 91
- Panel 12 (press down) 93
- Panel 13 (press down) 93
- 12: Appendix A – Command 94
- Abbreviations 94
- 15.00.038 - 95 - May 2002 95
- 15.00.038 - 97 - May 2002 97
Related products and manuals for Networking Lightwave Communications SCS3230
(88 pages)© 2020, manymanuals.com. All rights reserved. | 0.121 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals