Lightwave Communications Server 3200 User Manual download pdf (Page 22)

6.1.2 Logging In, Network Connection

UNIX_MACHINE# telnet 172.16.1.200 5000

Connecting to 172.16.1.200 port 5000...

Escape sequence is ^]

Welcome to the ConsoleServer3200 SysAdmin

LCI3200>>login

Please enter password: ****

sys admin>>

To log in on the ConsoleServer through a network connection, the network interface for

the ConsoleServer first must be configured through the serial terminal (see section 6.5).

Once the network interface is configured and functioning, telnet to port 5000 of the IP

address assigned to the ConsoleServer. The ConsoleServer will display a welcome

message and the LCI3200>> prompt. At the prompt, type LOGIN. The system will

only prompt for the password. At the Please enter password: prompt, enter the

administration password. The default administrator password is PASS

PASSPASS

PASS (see section

6.1.5 to change the administrator password). The ConsoleServer will only echo stars

when the password is entered. If the password is correct, the prompt will change to sys

admin>>.

6.1.3 Logging Out

To log out from an administration session, enter the command LOGOUT or LOGOFF. If

logging out from a network session, the ConsoleServer will disconnect the telnet

session. If logging out from a direct serial session, the ConsoleServer will return to the

LCI3200>> prompt.

6.1.4 System Help

To access the help screens, type <F1> H, ?, or HELP to display the help page. There

are two different help screens to reflect the commands available if the administrator is

logged in or logged out.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

No comments

Lightwave Communications Server 3200 User Manual Page 22