Lightwave Communications Server 3200 User Manual download pdf (Page 37)

33

sys admin>>CONNECTIONS

Terminal Connection List

01 KEVIN 01 SERVER ( Monitor mode )

02 00 ( Channel present )

03 00 ( Channel present )

04 00 ( Channel present )

05 00 ( Channel present )

06 00 ( Channel present )

07 00 ( Channel present )

08 00 ( Channel present )

09 00 ( Channel present )

10 00 ( Channel present )

11 00 ( Channel present )

12 00 ( Channel present )

13 00 ( Channel present )

14 00 ( Channel present )

15 00 ( Channel present )

16 00 ( Channel present )

17 <not installed>

sys admin>>

The above example shows that user KEVIN is logged in on terminal port 01, is

connected to device port 01 (which is named "Server" in the ConsoleServer 3200), and

is in monitor mode. The list will display the user ID of any logged-in users, the device

port to which they are connected, the device name assigned to that port, and the mode

of that connection (see sections 7.8, 7.9, and 7.10 for an explanation of the various

connection modes). If the user is not connected to any device, they shall simply be

listed as "User Logged-In".

When used with the /MONITOR command line qualifier, the CONNECTIONS command

updates the connection list on screen every time a user logs in or out or changes login

level (i.e., goes into direct mode), rather than simply displaying the list once as occurs

when the CONNECTIONS command is used alone. (See section 6.8, Sys Admin Session

Management Commands).

The CONNECTIONS command will also tell the sys admin which terminal ports are

present (in the list, they are referred to as "channels"). If the port is not functioning (i.e.,

the card is not present or there is a fault with the individual port), the port will be listed

as "<not installed>". It will also list Telnet Active for an active Telnet session.

Lightwave Communications Server 3200 User Manual Page 37