Lightwave Communications Server 3200 User Manual download pdf (Page 31)

sys admin>>terminal 1

Enter accepts present value

T1: 0=9600, 1=19200, 2=38400, 3=57600 | BAUD RATE: 9600>

T1: 0=1, 1=2 | STOP BITS: 1>

T1: 0=None, 1=Odd, 2=Even | PARITY: None>

T1: 0=8, 1=7, 2=6 | DATA BITS: 8>

T1: 0=DCE, 1=DTE | EQUIP PORT TYPE: DCE>

T1: 0=XON/OFF, 2=RTS/CTS | FLOW CONTROL: XON/XOFF>

Card installed, settings updated

sys admin>>

Device port location reference and device name template:

A list of device port names and their corresponding port number may be displayed by

using the LISTDEVICES command.

6.4 Terminals

TerminalsTerminals

Terminals Command

The sys admin defines terminal port parameters using the TERMINALS command in a

manner similar to the DEVICES command. If the command is entered by itself, the

terminal settings will display. If the terminal port number is specified after the

command, then the settings for that terminal port may be altered. Programmable

elements include: device name, baud rate, stop bits, parity, data bits, DCE/DTE, and

flow control as in the example below.

KLM

HI J KL MNO

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 87 88

No comments

Lightwave Communications Server 3200 User Manual Page 31