Lightwave Communications SCS3230 User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 97
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
ConsoleServer 3200 System Lightwave Communications
Rev. A - 22 - www.lightwavecom.com
Two options for your installation exist:
you are either UPGRADING a CS3200 system to be an SCS3230 system, or
you are installing a NEW SCS3230 system.
For simplicity, we will refer to a ConsoleServer 3200 system with the NETWORK/CONTROL
card installed as a SCS3220 system. In either case above, you will use THIS GUIDE for
administering the SCS3230 features and options, while referring to the ConsoleServer 3200
manual for a majority of the hardware installation instructions.
When you purchase a CS3200 chassis, you will get the CS3200 manual (PN 15.00.017).
When you purchase a SCS3230 NETWORK/CONTROL card, you will get the SCS3230
System Administrator's Guide (this manual, PN 15.00.038).
NOTE: The majority of this System Administrator's Guide is intended for the administration and
setup of the system, when using the SCS3230 kit. The hardware of the ConsoleServer 3200
may have been previously installed and is being upgraded at this time, or the system may be
installed as brand new installation.
Many hardware installation details are discussed in the ConsoleServer 3200 System Manual.
Not all are repeated in this manual.
4.1 Items in a SCS3230 Kit
The SCS3230 'kit' includes all of the cards and cables required to upgrade a CS3200 to the
SCS3230.
PN 500.000.0010 - 10/100 BT SECURE 3230 CARD KIT
includes:
- (1) 500.000.0014 -- 10/100 BT CNTL/NTWK Card
- (4) 500.000.0012 -- 3200 CHANNEL EXTENDER Card
- (4) 200.0161 -- CAT5 Cable, 24 inch long
This SCS3230 guide, PN 15.00.038 is included with each PN 500.000.0014 card.
Additional adapters and cables may also be included in the shipping container if ordered.
Orders with a large number of cables and adapters are usually shipped in separate containers.
If you are updating a CS3200 system, you may want to save your existing database from the
CS3200 and copy it into the SCS3230. To do so, you will use Backup to save the database,
and then Restore to copy it into the SCS3230's memory.
4: Installation Instructions
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 96 97

Comments to this Manuals

No comments