Lightwave Communications Server 3200 User Manual download pdf (Page 32)

sys admin>>TERMINALS 1

Enter accepts present value

T1: 0=9600, 1=19200, 2=38400, 3=57600 | BAUD RATE: 38400>

T1: 0=1, 1=2 | STOP BITS: 1>

T1: 0=None, 1=Odd, 2=Even | PARITY: None>

T1: 0=8, 1=7, 2=6 | DATA BITS: 8>

T1: 0=DCE, 1=DTE | EQUIP PORT TYPE: DTE>

T1: 0=XON/OFF, 1=DTR/DSR, 2=RTS/CTS | FLOW CONTROL: XON/XOFF>

Card installed, settings updated

sys admin>>

Terminal port connection location reference template:

6.5 Network

NetworkNetwork

Network Command

The NETWORK command will define a primary and secondary configuration for each card

slot. The primary configuration will define the network card’s IP address, local subnet

mask, and default gateway. The secondary configuration allows the sys admin to define

a routing path to reach a specific destination network via an alternate gateway that has

a better route to that destination network. The network administrator for the

ConsoleServer 3200 will determine if it is necessary to use this feature. If the

secondary configuration will not be used, all fields for the secondary configuration

should be set to 255.255.255.255 (which is the default setting).

CBDE

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 87 88

No comments

Lightwave Communications Server 3200 User Manual Page 32