Lightwave Communications Server 3200 User Manual download pdf (Page 42)

6.8.1 LINESPERPAGE

LINESPERPAGELINESPERPAGE

LINESPERPAGE Command

sys admin>>LINESPERPAGE

Lines per page set to 22

sys admin>LINESPERPAGE 10

Lines per page set to 10

sys admin>>

The LINESPERPAGE command allows the sys admin to change the number of lines

displayed per terminal page on the control card port before the MORE prompt is

displayed. The number of lines to display per page is entered after the command.

Entering the command without a number following will display the current amount of

lines displayed per page. The default value is 22, which will work properly with a 24-line

display.

6.8.2 TIMEOUT

TIMEOUTTIMEOUT

TIMEOUT Command

sys admin>>TIMEOUT

Timeout set to 1 minutes

sys admin>>TIMEOUT 0

Timeout set to 0 minutes

0 disables the timeout from occurring

sys admin>>TIMEOUT 5

Timeout set to 5 minutes

sys admin>>

The TIMEOUT command allows the sys admin to define a time limit on how long an idle

sys admin terminal may remain logged in. If there is no interaction for the defined

amount of time, the control card will log out the sys admin. The time limit in minutes is

entered as a command qualifier after the command, and must be entered as a whole

number. Defining the time limit as 0 will disable this function. The default value is one

minute.

6.9 Breaking User Connections

The sys admin has four commands available to forcibly break user connections to

devices. The commands BREAK and FORCELOGOUT allow the sys admin to break any

connection on demand, while TELNETTIMEOUT and MODEMTIMEOUT automatically

break idle user sessions for the network or modem card.

6.9.1 BREAK

BREAKBREAK

BREAK Command

sys admin>>BREAK 1

Break this connection? (write out YES) Yes or No: No>yes

sys admin>>

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 87 88

No comments

Lightwave Communications Server 3200 User Manual Page 42